MAX77647
Ultra-Configurable SIMO PMIC Featuring 3-Output Buck-Boost, 1-LDO for Long Battery Life Primary Cell Applications
Low IQ SIMO PMIC supports 1.8V operating voltage for primary cell applications
Top
Alternative Parts
Overview
Features and Benefits
- 1.8V to 3.3V Input Range
- Highly Integrated
- 3x Output, Single Inductor Multiple Output (SIMO) Buck-Boost Regulators
- Supports Wide Output Voltage Range from 0.5V to 5.1V for all SIMO Channels
- 1x 150mA LDO
- 100mA in LSW Mode
- 2x GPIOs (MAX77647)
- Watchdog Timer (MAX77647)
- Ultra Low-Power SIMO
- 1.3μA Operating Current (3x SIMO Channels)
- 0.1μA Shutdown Current
- 85% Efficiency in Buck-Only Mode (VIN = 2.4V, VOUT = 0.8V,10mA, IPK = 0.5A)
- 86% Efficiency in Buck-Boost Mode (VIN = 2.4V, VOUT = 1.8V,10mA, IPK = 0.5A)
- Less Than 20mVpp Output Ripple at VOUT = 1.8V
- Automatic Low-Power Mode to Normal-Power Mode Transition
- Flexible and Configurable
- Ultra-Configurable Resistor Programmable Output Voltages (MAX77646)
- I2C-Programmable Output Voltages (MAX77647)
- Small Size
- 5mm2 Wafer-Level Package (WLP)
- 20-Bump, 0.5mm Pitch, 5 x 4 Array
Product Details
The MAX77646/MAX77647 provides power supply solutions for low-power applications where size and efficiency are critical. The IC features a Single Inductor Multiple Output (SIMO) buck-boost regulator that provides three independently programmable power rails from a single inductor to minimize total solution size. A 150mA LDO provides ripple rejection for audio and other noise-sensitive applications. The LDO can also be configured as a load switch to manage power consumption by disconnecting external blocks when not required.
The MAX77646/MAX77647 operates with battery voltages from 1.8V with coin-cell, dual silver oxide, dual alkaline, and LiSOCL2 primary batteries.
The MAX77646 (RSEL variant) SIMO and LDO output voltages are individually programmable through resistors. A peak current limit input is used to set both the inductor's peak current limits of the device with a single resistor. Individual enable pins combined with the flexible resistor programmability allows the device to be tailored for many applications.
The MAX77647 (I2C variant) SIMO and LDO output voltages are individually programmable through I2C and in addition, includes two GPIOs with alternate modes for scalability. A bidirectional I2C serial interface allows for configuring and checking the status of the devices. An internal on/off controller provides a controlled startup sequence for the regulators and provides supervisory functionality while they are on. Numerous factory programmable options allow the device to be tailored for many applications, enabling faster time to market.
APPLICATIONS
- GNSS Module
- IoT Enabled Wireless Sensor Nodes
- Home Safety and Security Monitors
- Factory Safety and Security Monitors
- Fitness, Health, and Activity Trackers
Product Categories
Markets and Technologies
Comparable Parts Click to see all in Parametric Search
|
Part#
|
Vout Min (typ)
|
Output Current (typ)
|
Number of Outputs
|
Vin (min)
|
Vin (max)
|
|---|---|---|---|---|---|
|
800m
|
300m
|
3
|
2.7
|
5.5
|
|
|
800m
|
300m
|
3
|
2.7
|
5.5
|
|
|
500m
|
500m
|
4
|
2.7
|
5.5
|
|
|
500m
|
500m
|
4
|
2.7
|
5.5
|
|
|
500m
|
700m
|
4
|
2.5
|
5.5
|
|
|
500m
|
750m
|
5
|
2.7
|
5.5
|
Product Lifecycle
Recommended for New Designs
This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.
Evaluation Kits (1)
Documentation & Resources
Tools & Simulations
Software Development
Design Resources
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal.View our quality and reliability program and certifications for more information.
| Part Number | Material Declaration | Reliability Data | Pin/Package Drawing | CAD Symbols, Footprints & 3D Models |
|---|---|---|---|---|
| MAX77647AANP+ | Material Declaration | Reliability Data | 20-WLCSP-N/A | |
| MAX77647AANP+T | Material Declaration | Reliability Data | 20-WLCSP-N/A | |
| Wafer Fabrication Data |
Support & Discussions
Sample & Buy
Ordering FAQs
See our Ordering FAQs for answers to questions about online orders, payment options and more.
Buy Now Pricing
(**) Displayed Buy Now Price and Price Range is based on small quantity orders.
List Pricing
(*)The 1Ku list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
Lead Times
Please see the latest communication from our CCO regarding lead times.
Sampling
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.
Evaluation Boards
Pricing displayed is based on 1-piece.
Up to two boards can be purchased through Analog.com. To order more than two, please purchase through one of our listed distributors.
Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.